به سایت دکتر محمود بهنیا خوش آمدید.

هنوز هیچ محتوایی برای نمایش در صفحه اصلی ایجاد نشده است.

نشانی دفتر : دانشکده مهندسی معدن- دانشگاه صنعتی اصفهان-8415683111 ایمیل : behnia@iut.ac.ir تلفن : 33915105 31 98+ فکس : 33912776 31 98+ وب سایت : محمود بهنیا

مدیر گروه استخراج دانشکده مهندسی معدن

زمینه های تحقیقاتی : مکانیک سنگ

مکانیک شکست

دینامیک سنگ

شکست هیدرولیکی

دروس

زمین شناسی ساختمانی

دینامیک سنگ

روش های عددی در مکانیک سنگ

مکانیک محیط های پیوسته و ناپیوسته

آرشیو

آخرین مقالات

Behnia, Mahmoud, and Behzad Nateghpour. Considerations on the Laboratory Measurement of the Basic Friction Angle of Planar Rock Surfaces/Effect of Testing Methods and Surface Polishing," Geotechnical and Geological Engineering" : 1-12.

Behnia, Mahmoud, et al. "Comparison of experimental and empirical methods for estimating the shear strength of rock joints based on the statistical approach." Environmental Earth Sciences 79.14. 1-15.

Alneasan, Mahmoud, Mahmoud Behnia, and Raheb Bagherpour. "The effect of Poisson's ratio on the creation of tensile branches around dynamic faults." Journal of Structural Geology 131 (2020): 103950.

Aghababaei, Mohsen, Mahmoud Behnia, and Omid Moradian. "Experimental investigation on strength and failure behavior of carbonate rocks under multistage triaxial compression." International Journal of Rock Mechanics and Mining Sciences 123 (2019): 104099.

Alneasan, Mahmoud, Mahmoud Behnia, and Raheb Bagherpour. "Analytical and numerical investigations of dynamic crack propagation in brittle rocks under mixed mode loading." Construction and Building Materials 222 (2019): 544-555.

Alneasan, Mahmoud, Mahmoud Behnia, and Raheb Bagherpour. "Analytical investigations of interface crack growth between two dissimilar rock layers under compression and tension." Engineering Geology 259 (2019): 105188.

Behnia, Mahmoud, and Mohsen Ahmadloo. "Calculation of Dynamic Deformation Modulus of Rock Masses Using Rock Mass Classification Systems and Laboratory Tests." Journal of Dam and Hydroelectric Powerplant 6.22 (2019): 37-49.

Alneasan, Mahmoud, Mahmoud Behnia, and Raheb Bagherpour. "Frictional crack initiation and propagation in rocks under compressive loading." Theoretical and Applied Fracture Mechanics 97 (2018): 189-203.

Behnia, Mahmoud, Ahmad Rahmani Shahraki, and Zabihallah Moradian. "Selecting Equivalent Strength for Intact Rocks in Heterogeneous Rock Masses." Geotechnical and Geological Engineering 36.4 (2018): 1975-1989.

Alneasan, Mahmoud, Mahmoud Behnia, and Raheb Bagherpour. "Applicability of the classical fracture mechanics criteria to predict the crack propagation path in rock under compression." European Journal of Environmental and Civil Engineering (2018): 1-24.

Behnia, Mahmoud, and Masoud Cheraghi Seifabad. "Stability analysis and optimization of the support system of an underground powerhouse cavern considering rock mass variability." Environmental Earth Sciences 77.18 (2018): 645.

Behnia, Mahmoud, Javad Tavakoli, and Masoud Cheraghi Seifabad. "Estimation of Rock Block Size Distribution with Distinct Element Method (DEM) using Geological Strength Index (GSI)." Journal of Engineering Geology 12.2 (2018): 259-276.

Broojerdi, Mohsen Sharifi, Mahmoud Behnia, and Mousa Hazrati Aghchai. "Dynamic analysis of rock slopes using the distinct element method: A case study at the right abutment of the Upper Gotvand Dam, Iran." Journal of African Earth Sciences 145 (2018): 53-

Mokhtari, Maryam, and Mahmoud Behnia. "Comparison of LLNF, ANN, and COA-ANN techniques in modeling the uniaxial compressive strength and static Young’s Modulus of Limestone of the Dalan formation." Natural Resources Research 28.1 (2019): 223-239.

Aboutaleb, Shekoufeh, et al. "Using non-destructive tests for estimating uniaxial compressive strength and static Young’s modulus of carbonate rocks via some modeling techniques." Bulletin of Engineering Geology and the Environment 77.4 (2018): 1717-1728.

Aboutaleb, Shekoufeh, et al. "Combination of the physical and ultrasonic tests in estimating the uniaxial compressive strength and Young’s modulus of intact limestone rocks." Geotechnical and Geological Engineering 35.6 (2017): 3015-3023.

AZIZIAN, FATEMEH, ABDOLHADI GHAZVINIAN, and MAHMOUD BEHNIA. "Numerical Modeling of Failure Mechanism of Transversely Isotopic Under Triaxial Loading By Discrete Element Method." (2017): 67-76.

Behnia, Mahmoud, et al. "Numerical simulation of interaction between hydraulic and natural fractures in discontinuous media." Acta Geotechnica 10.4 (2015): 533-546.

Behnia, Mahmoud, et al. "Numerical modeling of hydraulic fracture propagation and reorientation." European Journal of Environmental and Civil Engineering 19.2 (2015): 152-167.

Behnia, M., et al. "Experimental Investigations of Hydraulic Fracturing Propagation in Multi-layer Formation." Modares Civil Engineering journal 13.3 (2013): 123-123.

Behnia, Mahmoud, et al. "Numerical simulation of crack propagation in layered formations." Arabian Journal of Geosciences 7.7 (2014): 2729-2737.

Behnia, Mahmoud, et al. "Numerical modeling of artificial hydro-fractures in hot dry rock reservoirs by using displacement discontinuty method." Proceedings, Thirty-Sixth Workshop on Geothermal Reservoir Engineering. 2011.

Behnia, M., et al. "On the crack propagation modeling of hydraulic fracturing by a hybridized displacement discontinuity/boundary collocation method." Journal of Mining and Environment 2.1 (2012).

Moradian, Z. A., et al. "Predicting slake durability index of soft sandstone using indirect tests." International journal of rock mechanics and mining sciences 47.4 (2010): 666-671.

Moradian, Z. A., and M. Behnia. "Predicting the uniaxial compressive strength and static Young’s modulus of intact sedimentary rocks using the ultrasonic test." International Journal of Geomechanics 9.1 (2009): 14-19.

فرم جستجو

به سایت دکتر محمود بهنیا خوش آمدید.

دروس

آخرین مقالات

خطا