Behnia, Mahmoud, and Behzad Nateghpour. Considerations on the Laboratory Measurement of the Basic Friction Angle of Planar Rock Surfaces/Effect of Testing Methods and Surface Polishing," Geotechnical and Geological Engineering" : 1-12. |
January |
2020 |
Behnia, Mahmoud, et al. "Comparison of experimental and empirical methods for estimating the shear strength of rock joints based on the statistical approach." Environmental Earth Sciences 79.14. 1-15. |
July |
2020 |
Alneasan, Mahmoud, Mahmoud Behnia, and Raheb Bagherpour. "The effect of Poisson's ratio on the creation of tensile branches around dynamic faults." Journal of Structural Geology 131 (2020): 103950. |
February |
2020 |
Alneasan, Mahmoud, Mahmoud Behnia, and Raheb Bagherpour. "Analytical and numerical investigations of dynamic crack propagation in brittle rocks under mixed mode loading." Construction and Building Materials 222 (2019): 544-555. |
October |
2019 |
Alneasan, Mahmoud, Mahmoud Behnia, and Raheb Bagherpour. "Analytical investigations of interface crack growth between two dissimilar rock layers under compression and tension." Engineering Geology 259 (2019): 105188. |
September |
2019 |
Behnia, Mahmoud, and Mohsen Ahmadloo. "Calculation of Dynamic Deformation Modulus of Rock Masses Using Rock Mass Classification Systems and Laboratory Tests." Journal of Dam and Hydroelectric Powerplant 6.22 (2019): 37-49. |
December |
2019 |
Aghababaei, Mohsen, Mahmoud Behnia, and Omid Moradian. "Experimental investigation on strength and failure behavior of carbonate rocks under multistage triaxial compression." International Journal of Rock Mechanics and Mining Sciences 123 (2019): 104099. |
November |
2019 |
Aghababaei, Mohsen, Mahmoud Behnia, and Omid Moradian. "Experimental investigation on strength and failure behavior of carbonate rocks under multistage triaxial compression." International Journal of Rock Mechanics and Mining Sciences 123 (2019): 104099. |
November |
2019 |
Behnia, Mahmoud, and Masoud Cheraghi Seifabad. "Stability analysis and optimization of the support system of an underground powerhouse cavern considering rock mass variability." Environmental Earth Sciences 77.18 (2018): 645. |
September |
2018 |
Behnia, Mahmoud, Javad Tavakoli, and Masoud Cheraghi Seifabad. "Estimation of Rock Block Size Distribution with Distinct Element Method (DEM) using Geological Strength Index (GSI)." Journal of Engineering Geology 12.2 (2018): 259-276. |
May |
2018 |
Broojerdi, Mohsen Sharifi, Mahmoud Behnia, and Mousa Hazrati Aghchai. "Dynamic analysis of rock slopes using the distinct element method: A case study at the right abutment of the Upper Gotvand Dam, Iran." Journal of African Earth Sciences 145 (2018): 53- |
September |
2018 |
Mokhtari, Maryam, and Mahmoud Behnia. "Comparison of LLNF, ANN, and COA-ANN techniques in modeling the uniaxial compressive strength and static Young’s Modulus of Limestone of the Dalan formation." Natural Resources Research 28.1 (2019): 223-239. |
May |
2018 |
Alneasan, Mahmoud, Mahmoud Behnia, and Raheb Bagherpour. "Frictional crack initiation and propagation in rocks under compressive loading." Theoretical and Applied Fracture Mechanics 97 (2018): 189-203. |
October |
2018 |
Alneasan, Mahmoud, Mahmoud Behnia, and Raheb Bagherpour. "Frictional crack initiation and propagation in rocks under compressive loading." Theoretical and Applied Fracture Mechanics 97 (2018): 189-203. |
October |
2018 |
Behnia, Mahmoud, Ahmad Rahmani Shahraki, and Zabihallah Moradian. "Selecting Equivalent Strength for Intact Rocks in Heterogeneous Rock Masses." Geotechnical and Geological Engineering 36.4 (2018): 1975-1989. |
January |
2018 |
Alneasan, Mahmoud, Mahmoud Behnia, and Raheb Bagherpour. "Applicability of the classical fracture mechanics criteria to predict the crack propagation path in rock under compression." European Journal of Environmental and Civil Engineering (2018): 1-24. |
June |
2018 |
Aboutaleb, Shekoufeh, et al. "Using non-destructive tests for estimating uniaxial compressive strength and static Young’s modulus of carbonate rocks via some modeling techniques." Bulletin of Engineering Geology and the Environment 77.4 (2018): 1717-1728. |
April |
2017 |
Aboutaleb, Shekoufeh, et al. "Combination of the physical and ultrasonic tests in estimating the uniaxial compressive strength and Young’s modulus of intact limestone rocks." Geotechnical and Geological Engineering 35.6 (2017): 3015-3023. |
June |
2017 |
AZIZIAN, FATEMEH, ABDOLHADI GHAZVINIAN, and MAHMOUD BEHNIA. "Numerical Modeling of Failure Mechanism of Transversely Isotopic Under Triaxial Loading By Discrete Element Method." (2017): 67-76. |
Fall |
2016 |
Behnia, Mahmoud, et al. "Numerical simulation of interaction between hydraulic and natural fractures in discontinuous media." Acta Geotechnica 10.4 (2015): 533-546. |
June |
2014 |